The BMW Group has now signed a corresponding agreement with Salzgitter AG for delivery of low-carbon steel. The steel will be used in standard production of cars at the BMW Group’s European plants from 2026 onwards. With this move, the BMW Group is expanding its sourcing of low-carbon steel to two suppliers. The aim is to use low-carbon steel to meet over 40% of demand at its European plants by 2030, thereby reducing CO2 emissions by up to 400,000 tonnes per year.
“This is an important step in substantially reducing CO2 emissions at source in the supplier network,” said Joachim Post, member of the Board of Management of BMW AG responsible for Purchasing and Supplier Network. “Our aim is to reduce vehicles’ lifecycle carbon footprint with a holistic approach. With steel, in particular, we are leading the way by sourcing low-carbon steel for our plants in Europe in the future.”
“Salzgitter AG is putting ‘circularity’ at the centre of its new strategy,” said Gunnar Groebler, CEO of Salzgitter AG. “We firmly believe that closed loops of recoverable materials can only realise their full effect with strong partners. We are delighted about the circular economy cooperation with the BMW Group and the agreement to supply green steel to our long-standing customer. Partnering for Transformation – this is how we will translate our new corporate vision into practice.”
Agreements with two suppliers on low-carbon steel will meet over 40% of steel demand at European plants
The BMW Group already signed an agreement with Swedish startup H2 Green Steel in October of last year. H2 Green Steel will supply the BMW Group’s European plants with steel produced exclusively using hydrogen and green power from renewable energies from 2025 onwards. This process will reduce CO2 emissions by around 95%.
Together, the two agreements will supply over 40% of the steel required by the company’s European plants and save around 400,000 tonnes of CO2 emissions per year. BMW Group press plants in Europe process more than half a million tonnes of steel per year.
To lower CO2 emissions from steel production on a massive scale, Salzgitter AG is gradually switching to virtually carbon-free production. Electricity from renewable sources and its use in production of hydrogen from electrolysis are key elements of the transformation. This green hydrogen will replace the coal currently used in the conventional blast-furnace process. This is made possible by so-called direct reduction plants, which use hydrogen to directly reduce iron ore to iron in the solid-state. The solid iron produced in this way is then melted down with steel scrap in an electric arc furnace powered by renewable electricity. Salzgitter AG plans to use this method to gradually reduce CO2 emissions from steel production to around 5% of what they originally were.
Closed loop conserves resources and reduces CO2 emissions
The BMW Group already established a closed-loop material cycle for sheet steel waste from BMW Group Plant Leipzig with Salzgitter AG more than five years ago. After delivering steel coils to the plant, Salzgitter AG takes away steel remnants of the kind produced at press plants, for example, when doors are punched out, and uses this material to produce new steel. This steel is then supplied to the BMW Group plants. In this way, raw materials can be used multiple times in a circular economy, thereby conserving natural resources.
Sheet steel waste from the BMW Group’s other European plants is also either reused through a direct material cycle or sent back to the steel producer via steel traders and processed into new steel.
Use of secondary steel from circular economy reduces CO2 emissions
Up to a quarter of the steel in BMW Group vehicles already comes from recycling loops. The BMW Group plans to increase its percentage of secondary steel in stages, reaching up to 50% by 2030. Since this requires significantly less energy, CO2 emissions from production of secondary steel are an average of 50-80% lower than from primary steel.
Investment in startups accelerate development of new technologies
In addition to sourcing low-carbon steel, the BMW Group has also invested in an innovative method for carbon-free steel production developed by American startup Boston Metal, through its venture capital fund, BMW i Ventures. Boston Metal uses electricity for its new technology, which, by means of an electrolysis cell, produces molten iron that is later processed into steel. If electricity from renewable energies is used for this process, then steel production is carbon-free. Over the coming years, Boston Metal plans to expand the new method for steel production on an industrial scale.
Through its investment in startups, the BMW Group aims to accelerate development of new technologies, promote competition and provide impetus that will make it easier for young companies to enter the market. Innovative technologies provide better, more sustainable and more efficient access to raw materials.